浙江浙创防爆电气有限公司Yueqing City, Zhejiang Province, a Explosion-proof Electrical Co., Ltd.
BZC51防爆操作柱
  • BZC51防爆操作柱
  • BZC51防爆操作柱
  • BZC51防爆操作柱

产品描述

BZC51防爆操作柱适应范围:
◆ 适用于爆炸性气体环境1区、2区; 
◆ 适用于可燃性粉尘环境21区、22区; 
◆ 适用于ⅡA、ⅡB、ⅡC级爆炸性气体环境; 
◆ 适用于温度组别为T1~T6/T4的环境; 
◆ 适用于石油采炼、储存、化工、医药、纺织、印染、**及军事设施等爆炸性危险环境;◆ 广泛用于电气控制电路中
◆ 方案多样可根据用户提供的电气系统图进行生产
BZC51防爆操作柱结构特性:
◆本产品均严格按照《爆炸性气体环境使用电气设备》标准及其他相关的标准要求,可在易燃易爆危险场所安全可靠工作。
◆外壳采用铝合金铸造成型,经抛丸处理后高压静电喷塑
◆内装指示灯、按钮、万能转换开关、电流表、电压表、电位器等,可按用户要求装配其他仪表
◆万能转换开关30余种功能,用户可按要求选择
◆可根据用户要求配装防雨罩
◆特殊设计的密封结构,满足防爆性能的同时有效提高产品的防护等级
◆钢管或电缆布线
BZC51防爆操作柱技术参数:

 

执行标准

GB3836.1、GB3836.2、GB3836.3、IEC60079

防爆标志

Exde II BT6、Exd II BT6

额定电压

AC220/380V

额定电流

10A

使用类别

AC-14

防护等级

IP55

防腐等级

WF1

壳体类型

I、II、III

IV、V

引入口规格

G1

G2

适用电缆外径

Φ11~18mm

Φ25~38mm

      B       B.浙创防爆功能与双按钮相同,起动复
位,增加了锁停档位,避免误操作
Functional wiringis the same as
button with auto resetting,add
"lock-stop"to avoid mistake operating.
BZC51防爆操作柱
     C       C.功能为2个带常开触点的按钮
自动复位,适合于高压电机控制
电路.或采用A功能面板.
Button with 2usually-open contacts
and auto-resetting,Suitable for
high-voltage engine control circuit
or function panel A. 
     D       D.小功率电源开关.
Mini-power switch
     E       E.功能与三钮相同,控制电机正反
转用,正,反起动位置自复位.
Function is the same as three buttons
buttons to control-conversion of FW&BW
starters can auto-reset.
     F       F.选择开关,中间带停止档位.
Selected switch with stop location in midst.
 
     G       G.相当于2个按钮和一个切换开关
装于一轴,在起动与停止之前均可
输出联络信号或监控信号
Be equol to mounting two buttons and one
change-over switch in one axe.Can output
contact signal or inspect signal beford
startin and stopping.
      H       H,多信号逐级传送,方向任意旋转.
Multi-signals transmit gradually
and conbvert in random.
      I       I.在H基础上增加了总信号传送功能.
Add function of chief-signal transmitting
on the base of H struchurd.
 

BZC51防爆操作柱
       J                 J.二位进级,逐级切换.
   Change-over gradually.
 
      K            K,切换开关
    Change-over switch.
      L           L.三极双掷选择开关
    Selected switch with tree poles
    and two launches.
      M           M,自动,手动,起动三位置转换开关
    起动自复位,起动后必须经过停止档位 
才能转向自动档位.
   Change-over switch with automtion http://www.jifbdq。。com/    http://www.zonhoe。。com/

   hand,starting.Convert to automation
   through stop location.
     N          浙创防爆N,与M万能结构略有不同,起动后不经停
   止档位直接转向自动档次.
   Little different from m universal
   structure,it don't pass stop location
   to automation location.
    O          O.起动为双触点带锁停功能,起动自复位.
   Double contacts for starting with
   lock-stopping and auto-resetting..
    P          P,停止为双触点,可分别代替A和C,起停,自
   动复位..BZC51防爆操作柱
   Double contacts for stopping,to        substitude
A and Cfor starting,stopping and abuto-resetting.
    Q           Q 浙创防爆停止带双触点,带锁停功能,起动自复位.
    Double contacts for stopping,the
    same as Buniversal panelwith
    lock-stopping and auto-resetting.
     R          R,起,停均带双触点,起停均自动复位,同
   A万能面板.
  Doulbe for both starting and stopping
  The same as A universal panel with
  auto-resetting when starting and     stopping.
      S       S.起停前先传送一个联络信号.
Tramsmit a contact isgnal before
starting and stopping.


    T               T.起,停均带锁停档位功能,避
免误操作,不自动复位.
Equipped with lock-stop
location when starting and stopping.
Can't autoreset to provide mistake operation.
 
    U        U.为双控选择开关
Double-control switch.
 
     V       V.电压换相测量转换开关.
Change-over switch for voltage
usually-opens,the left is as same
as the right
 
    W       W.左右一样的一个正常开自复位按钮.
One auto-reset button with
two usually-opens,the left is
as same as the right.
 
    X       X.为带2个2常开触点的自复位按钮
Two auto-reset buttons with two
usually-opens.
 
    Y       Y.为带4个常开触点的自复位按钮.
Auto-rest button with four usually-opens..
 
     Z       Z.电源程序开关,中间断开,左右均接近
可作消防开关.
Power-source programmed switch can
cut off in between and cut in both
the left and right which an be used
as extinctive switch.
 
    a-1        a-1.用于起动,点动混合电路.
For starting and inching the mixed
circuit.
 
   b-1       b-1.双联动开关.
Double starting switch.
 
    c-1       C-1. 急停按钮开关.
Emergency stopping switch.
 


 外形安装及举例 Outline example    
   
                              CBC51-D2K1(II型)
                二灯一开关挂式 Two lamps one switch,pendant
   
                  CBC51-B1K1 G(III型)
           一表一开关挂式 One meter one switch,pendant                       CBC51-K2 G(III型)
                         二开关挂式 Two switches pendant
   
          CBC51-B1D2K1  G(IV型)
       一表二灯一开关挂式 One meter,two lamps one switch,pendant       CBC51-A2D2k1  G(IV型)
 二钮二灯一开关挂式 Two buttons,mtwo lamps one switch,pendant 


   
            CBC51-A2K1  G(II型)
       二钮一开关挂式 Two buttons one switch.Pendant         CBC51-A2D2  G(II型)
        二钮二灯挂式 Two buttons two lamps,pendant
   
          CBC51-A2B1  G(III型)
       二钮一表挂式 Two buttons one meter,pendant              CBC51-A2  G(I型)
                    二钮挂式 Two buttons,pendant
    
        CBC51-A2B1D2  G(IV型)
       二钮一表二灯挂式 Two buttons one lamp,pendant                 CBC51-k1  G(I型)

                         一天关灯挂式 One switch pendant

BZC51防爆操作柱定购流程
一.说明产品的规格,参数与数量或致电:   Q
二.我方在参考客户供提供的相关资料给予定制合适的订购方案
三.双方同意,传真形式签定销售合同
四.用户付款后,方可生产或需打订金需付30%.在产品做好发货当天,请于将余款补齐即可,方可发货.
五.合同签订,双方需盖公司公章,予以证明,合同起效,双方严格履行合同.
六.产品质保一年,如无人为条件,我公司免费保证一年维修与维护.
BZC51防爆操作柱


http://www.zcfbdq.com

产品推荐